Guida in linea MOBOTIX

Microphone and Speaker

The Loudspeaker and Microphone dialog contains the basic microphone and speaker settings of the MOBOTIX camera.

Notes:

• Click on the More button at the bottom of the dialog to display all options.
• This feature is not available for Web and Basic models.

Audio Input

• Signal Source
  • Disabled: Disables the audio input.
  • Microphone: The camera uses the microphone as audio input.
  • Line In: The camera uses the Line In pin of the D-Sub HD15 connector as audio input (only M12, D12, and V12 models).
• Select one of the following options:
  • Low sensitivity: Setting for short distances.
  • Medium sensitivity: Setting for medium distances.
  • High sensitivity: Setting for longer distances. If you select this setting, background noise may occur.
• Click on the Test button to check your setting. In order to perform this check, the speaker must be activated.

Audio Output

• Activate the speaker.
• Activate or deactivate the speaker and set the amplification.
  Value range: -30 .. 0 .. 30
• In order to check your settings, select one of the audio files and click on the Test button.

Announce Network Data

If this parameter is enabled, the camera will announce its network configuration (IP address, network mask, MAC address; see Ethernet Interface) over the speaker every time the camera starts up. If the announcement is enabled, the announcement can be started by e.g. pressing the R button of the camera (to start DHCP or during runtime) or by clicking on a softbutton of the user interface.

Deactivating the Microphone

Deactivating a camera's microphone may become necessary in order to protect the privacy or for other reasons. You can now permanently and irreversibly deactivate the microphone in the Loudspeaker and Microphone dialog.

1. Click on the More button.
2. Click on the disable link that appears in the first paragraph of the explanation.
3. Follow the instructions in the Permanently Disable the Camera Microphone section.

Memorizzazione della configurazione

Fare clic sul pulsante Imposta per attivare le impostazioni e salvarle fino al successivo riavvio della videocamera.

Fare clic sul pulsante Chiudi per chiudere la finestra di dialogo. Durante la chiusura della finestra di dialogo il sistema verifica eventuali modifiche nella configurazione. Se le rileva chiede di memorizzare in modo permanente l'intera configurazione.